Ideal untuk berbagai aplikasi pemantauan dalam ruangan, pencatat data nirkabel mandiri ini memungkinkan Anda mengakses data suhu kapan saja dari perangkat seluler Anda dalam jarak 30 meter. Dan, tidak memerlukan peralatan khusus selain perangkat seluler untuk mengonfigurasi logger atau membaca data.

Aplikasi HOBOconnect gratis dari Onset membuatnya cepat dan mudah untuk melihat grafik suhu, memeriksa status operasional data logger MX100, mengonfigurasi pemberitahuan alarm, dan berbagi file data. Anda dapat mengunduh aplikasinya di sini:

Fitur:

• Atur dan lepas logger secara nirkabel dari perangkat seluler Anda – tidak perlu internet, kabel, atau komputer
• Nilai luar biasa untuk kenyamanan logger komunikasi BLE
• Desain tahan percikan memungkinkan penggunaan di lingkungan lembab dan aplikasi penyemprotan
• Mudah untuk menyebarkan, membongkar, dan berbagi data suhu menggunakan aplikasi HOBOconnect
• Alarm visual di tampilan logger dan aplikasi seluler terus memberi tahu Anda jika ada masalah
• Siapkan dan mulai pemantauan dalam hitungan menit!

Spesifikasi:

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

The post HOBO Temperature Data Logger – MX100 appeared first on LOGGERINDO Indonesia.

Fitur:

• Tampilan LCD yang mudah dilihat
• Kapasitas memori besar
• Alarm akan muncul jika melewati Ambang batas tinggi & rendah
• Mode logging Burst dan Statistik baru
• Kompatibel dengan perangkat lunak HOBOware dan HOBOware Pro untuk penyiapan, grafik, dan analisis logger

Spesifikasi

Temperature Sensor

Range: -20° to 70°C (-4° to 158°F)
Accuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution: 0.024°C at 25°C (0.04°F at 77°F)
Response time: 8 minutes in air moving 1 m/s (2.2 mph)
Drift: <0.1°C (0.18°F) per year
Logger

Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging modes: Normal, Burst or Statistics
Memory modes: Wrap when Full or Stop when Full
Start modes: Immediately, Push Button, Date & Time or Next Interval
Stop modes: When Memory Full, Push Button, or Date & Time
Restart mode: Push Button
Time accuracy: ±1 minute per month at 25°C (77°F)
Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery type: One 3V CR2032 lithium battery ​
Memory: 128 KB (84,650 measurements, maximum)
Download type: USB 2.0 interface
Full memory download time: 20 seconds
LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)
Weight: 23 g (0.81 oz)
Environmental rating: IP50

 – The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)

The post HOBO Temperature Data Logger – UX100-001 appeared first on LOGGERINDO Indonesia.

MX1102 juga dilengkapi dengan port USB sehingga dapat digunakan dengan komputer yang menjalankan perangkat lunak grafik & analisis HOBOware.

MX1102 memiliki dukungan MX Gateway untuk akses jarak jauh ke data Anda di perangkat lunak HOBOlink berbasis cloud Onset.

Fitur:

• Komunikasi tanpa kabel dengan Teknologi Bluetooth Low Energy (BLE)
• Masa pakai baterai enam bulan dengan laju logging CO2 5 menit
• Mudah digunakan dan dilepas menggunakan aplikasi HOBOconnect gratis
• Ambang batas alarm tinggi & rendah visual dan terdengar
• Teknologi sensor CO2 NDIR yang dapat mengkalibrasi sendiri memastikan akurasi yang optimal dan biaya perawatan yang lebih rendah
• Teknologi konektivitas yang dipatenkan

Spesifikasi:

Temperature Sensor
Range	0° to 50°C (32° to 122°F)
Accuracy	±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution	0.024°C at 25°C (0.04°F at 77°F)
Drift	<0.1°C (0.18°F) per year
RH Sensor
Range	1% to 90% RH (non-condensing)
Accuracy	±2% from 20% to 80% typical to a maximum of ±4.5% including hysteresis at 25°C (77°F); below 20% and above 80% ±6% typical
Resolution	0.01%
Drift	<1% per year typical
CO2 Sensor
Range	0 to 5,000 ppm
Accuracy	±50 ppm ±5% of reading at 25°C (77°F), less than 90% RH non-condensing and 1,013 mbar
Warm-up Time	15 seconds
Calibration	Auto or manual to 400 ppm
Non-linearity	<1% of FS
Pressure Dependence	0.13% of reading per mm Hg (corrected via user input for elevation/altitude)
Operating Pressure Range	950 to 1,050 mbar (use Altitude Compensation for outside of this range)
Compensated Pressure Range	-305 to 5,486 m (-1,000 to 18,000 ft)
Sensing Method	Non-dispersive infrared (NDIR) absorption
Response Time
Temperature	12 minutes to 90% in airflow of 1 m/s (2.2 mph)
RH	1 minute to 90% in airflow of 1 m/s (2.2 mph)
CO2	1 minute to 90% in airflow of 1 m/s (2.2 mph)
Logger
Radio Power	1 mW (0 dBm)
Transmission Range	Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard	Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)
Logger Operating Range	0° to 50°C (32° to 122°F); 0 to 95% RH (non-condensing)
Logging Rate	1 second to 18 hours
Logging Modes	Fixed interval (normal, statistics) or burst
Memory Modes	Wrap when full or stop when full
Start Modes	Immediate, push button, date & time, or next interval
Stop Modes	When memory full, push button, date & time, or after a set logging period
Time Accuracy	± 1 minute per month at 25°C (77°F)
Power Source	4 AA 1.5 Volt batteries (user replaceable) or USB power source (5 V DC, 2 Watts)
Battery Life	6 months, typical with logging and sampling intervals of 5 minutes or slower; 6 months or less with logging and sampling intervals faster than 5 minutes while logging CO2. Entering burst logging mode will impact battery life. With app use, battery life can be reduced by remaining connected, excessive readouts, audible alarms, and paging. Visual/audible alarms and other events can have a marginal impact on battery life.
Memory	128 KB (84,650 measurements, maximum)
Download Type	USB 2.0 interface or via Bluetooth Smart
Full Memory Download Time	20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger
LCD	LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size	7.62 x 12.95 x 4.78 cm (3.0 x 5.1 x 1.88 inches)
Weight	267.4 g (9.43 oz)
Environmental Rating	IP50
	The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

The post HOBO Carbon Dioxide – Temp – RH Data Logger – MX1102A appeared first on LOGGERINDO Indonesia.

Terapkan produk ini dengan berbagai smart-sensor plug-and-play yang telah ditentukan sebelumnya untuk menciptakan sistem pemantauan yang kuat. Kompatibel dengan perangkat lunak HOBOware®, peneliti dapat melakukan analisis data yang efektif dalam beberapa menit.

Fitur

Pencatat data paling fleksibel di Onset merekam hingga 15 channel dari lebih dari selusin pengukuran
Menyediakan pot 12v untuk sensor pihak ketiga
Sensor cerdas yang telah dikonfigurasi
Modul pengkondisian sinyal mempertahankan konfigurasi sampai Anda mengubahnya, memberikan kenyamanan plug-and-play
Pilihan daya yang fleksibel : menggunakan baterai atau adaptor daya AC

Spesifikasi

Operating range:
-20° to 50°C (-4° to 122°F) with alkaline batteries
-40° to 60°C (-40° to 140°F) with lithium batteries
Sensor inputs: Three FlexSmart multi-channel modules and up to 6 Smart Sensors (which may have multiple parameters/channels)
Sensor connectors: Six RJ-12 Smart Sensor jacks plus 3 FlexSmart module slots
Communication: RS-232 via 3.5 mm serial port or/and 9-pin D-Sub connector
Dimensions: 15.6 cm x 8.4 cm x 4.6 cm (6.13″ x 3.31″ x 1.81″)
Weight: 435 g (15.23 oz) with batteries 238 g (8.33 oz) without batteries
Memory: 512K nonvolatile flash data storage
Memory modes: Stop when full; wrap when full
Operational indicators: Six indicators provide logging and sensor network status
Logging interval: One second to 18 hours, user-specified interval (2-second minimum for two-channel S-FS-TRMSA operation)
Sensor excitation: 12 V DC at 200 mA total, with user-programmable warmup time on a per-channel basis
Battery life: One year typical use (up to 75 mA excitation with 10-minute or longer logging Interval and 1-second warmup time)
Battery type: Eight standard AA alkaline batteries included (for operating conditions -20°C/-4°F to 50°C/122°F); optional AA lithium batteries available for operating conditions of -40° to 60°C (-40° to 140°F).
External power: Supports optional 13.6 V DC regulated AC Wall Adapter Connector. Internal batteries may remain installed. Alternatively, an automotive battery or 9-12 V DC regulated Wall Adapter may be used, but it is recommended to remove the internal batteries since they will discharge to the level of the external supply.
Time accuracy: 0 to 2 seconds for the first data point and ±5 seconds per week at 25°C (77°F)
Logging mode: Immediate, timed delay, or trigger (button-push) start options; supports sampling intervals for some sensors
Data communication: Current readings while logging; read out while logging; read out when stopped

This product meets CE specification EN61326 criterion C for ESD, criterion C for Radiated Immunity, criterion B for Fast Transient, criterion A for Conducted Immunity, and criterion A for Power Frequency Magnetic Fields. To minimize measurement errors due to ambient RF, use the shortest possible probe sensor cable length.

The post HOBO H22 Energy Data Logger – H22-001 appeared first on LOGGERINDO Indonesia.

Fitur

• Tampilan LCD yang mudah dilihat
• Kapasitas memori besar
• Alarm yang muncul apabila melewati ambang batas tinggi dan rendah
• Mode logging Burst dan Statistik baru
• Sensor Kelembaban Relatif yang dapat diganti pengguna
• Kompatibel dengan perangkat lunak HOBOware dan HOBOware Pro untuk penyiapan, grafik, dan analisis logger

Spesifikasi

Temperature Sensor

Range: -20° to 70°C (-4° to 158°F)
Accuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution: 0.024°C at 25°C (0.04°F at 77°F)
Response time: 4 minutes in air moving 1 m/s (2.2 mph)
Drift: <0.1°C (0.18°F) per year

RH Sensor

Range: 15% to 95% (non-condensing)
Accuracy:
±3.5% from 25% to 85% including hysteresis at 25°C (77°F); below 25% and above 85% ±5% typical
Resolution: 0.07% at 25°C (77°F) and 30% RH
Response time: 43 seconds to 90% in airflow of 1 m/s (2.2 mph)
Drift: <1% per year typical

Logger

Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging modes: Normal, Burst or Statistics
Memory modes: Wrap when Full or Stop when Full
Start modes: Immediately, Push Button, Date & Time or Next Interval
Stop modes: When Memory Full, Push Button, or Date & Time
Restart mode: Push Button
Time accuracy: ±1 minute per month at 25°C (77°F)
Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery type: One 3V CR2032 lithium battery
Memory: 128 KB (84,650 measurements, maximum)
Download type: USB 2.0 interface
Full memory download time: 20 seconds
LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 3.66 x 8.48 x 1.52 cm (1.44 x 3.34 x 0.6 in.)
Weight: 30 g (1.06 oz)
Environmental rating: IP50

 – The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)

The post HOBO Temperature/Relative Humidity 3.5% Data Logger – UX100-003 appeared first on LOGGERINDO Indonesia.

Data logger dilengkapi dengan sensor suhu internal untuk mencatat suhu sekitar, yang selanjutnya memperluas jangkauan kemungkinan aplikasi.

Onset juga menawarkan pencatat data termokopel saluran tunggal, HOBO UX100-014M.

Fitur

• Tampilan LCD yang mudah dilihat mengonfirmasi data dan status baterai
• Pembacaan mendekati real-time dari suhu saat ini
• Alarm akan muncul jika suhu melebihi ambang batas tinggi atau rendah
• Kapasitas memori besar mampu menyimpan 1,6 juta pengukuran
• Tombol ‘Mulai’, ‘Hentikan’, dan ‘Mulai Ulang’
• Firmware yang dapat diupgrade pengguna
• Pelindung opsional memungkinkan penggunaan logger di lingkungan luar ruangan
• Kompatibel dengan perangkat lunak HOBOware dan HOBOware Pro untuk penyiapan, grafik, dan analisis logger

Spesifikasi

Thermocouple

The post HOBO 4-Channel Thermocouple Data Logger – UX120-014M appeared first on LOGGERINDO Indonesia.

Sebagai pencatat data dengan akurasi tertinggi, data logger ini memberikan akurasi dua kali lipat dari model sebelumnya, LCD yang mudah dipasang, dan dukungan fleksibel hingga empat sensor eksternal untuk mengukur suhu, arus, CO2, voltase, dan banyak lagi.

Pencatat data sangat ideal untuk audit energi, studi komisioning gedung, penjadwalan peralatan, dan banyak lagi.

Fitur

• Akurasi dua kali lipat dibandingkan model sebelumnya dengan resolusi 16-bit
• Flexible Support untuk berbagai sensor eksternal
• LCD mengkonfirmasi operasi pencatat dan menampilkan data pengukuran mendekati real-time
• Menyediakan opsi logging deviasi minimum, maksimum, rata-rata dan standar
• Alarm akan menyala saat pembacaan sensor melebihi ambang batas yang ditetapkan
• Menyimpan 1,9 juta pengukuran untuk pemantauan yang lebih lama
• Kompatibel dengan perangkat lunak HOBOware dan HOBOware Pro untuk penyiapan, grafik, dan analisis logger

Spesifikasi

Logger w/Cable

Measurement Range:
4-20mA (w/CABLE-4-20MA) 0 to 20.1 mA
0 to 2.5 V (w/CABLE-2.5-STEREO)
0 to 5 V (w/CABLE-ADAP5)
0 to 10 V (w/ CABLE-ADAP10)
0 to 24 V (w/ CABLE-ADAP24)

Accuracy:
4-20mA ±0.001 mA ±0.2% of reading (w/CABLE-4-20MA)
±0.1 mV ±0.1% of reading (w/CABLE-2.5-STEREO)
±0.2 mV ±0.3% of reading (w/CABLE-ADAP5)
±0.4 mV ±0.3% of reading (w/ CABLE-ADAP10)
±1.0 mV ±0.3% of reading(w/ CABLE-ADAP24)

Resolution:
0.3 µA 4-20mA (w/CABLE-4-20MA)
40 µV (w/CABLE-2.5-STEREO)
80 µV (w/CABLE-ADAP5)
160 µV (w/ CABLE-ADAP10)
384 µV (w/ CABLE-ADAP24)

Logger

Operating range logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing);
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification
Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging modes: Normal, burst, or statistics
Memory modes: Wrap when full or stop when full
Start modes: Immediate, push button, date & time, or next interval
Stop modes: When memory full, push button, or date & time
Restart mode: Push button
Time accuracy: ±1 minute per month at 25°C (77°F), see Plot A
Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery type: Two AAA 1.5 V alkaline batteries, user replaceable
Memory: 4 MB (1.9 million measurements, maximum)
Download type: USB 2.0 interface
Full memory download time: approximately 1.5 minutes
LCD: LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Weight: 107.5 g (3.79 oz)
Environmental rating: IP50

 – The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

The post HOBO 4-Channel Analog Data Logger – UX120-006M appeared first on LOGGERINDO Indonesia.

Onset HOBO MX1101 Data Logger mengukur dan mentransmisikan data suhu dan kelembaban relatif secara nirkabel ke perangkat seluler melalui teknologi Bluetooth Low Energy (BLE).

Pencatat data nirkabel bekerja dengan perangkat seluler Anda dan aplikasi HOBOconnect gratis dari Onset sehingga Anda dapat mengonfigurasi pencatat dan membaca data dalam jarak 100 kaki, tanpa memerlukan peralatan khusus lainnya. Anda juga dapat melihat data dalam grafik, memeriksa status operasional logger, mengonfigurasi pemberitahuan alarm, dan berbagi file data.

Tambahkan MX Gateway untuk akses jarak jauh ke data Anda di perangkat lunak HOBOlink berbasis cloud Onset.

Fitur

• Komunikasi nirkabel melalui teknologi Bluetooth Low Energy (BLE)
• Mudah digunakan dan dibongkar menggunakan aplikasi HOBOconnect gratis
• Alarm akan muncul apabila melewati ambang batas tinggi dan rendah
• Menyimpan 84.000 pengukuran
• Akurasi: +/- 0.2C dan +/- 2% RH
• Fitur find-me
• Teknologi konektivitas yang dipatenkan

Spesifikasi

Temperature Sensor
Range	-20° to 70°C (-4° to 158°F)
Accuracy	±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution	0.024°C at 25°C (0.04°F at 77°F)
Drift	<0.1°C (0.18°F) per year
RH Sensor*
Range	1% to 90%, non-condensing
Accuracy	±2.0% from 20% RH to 80% RH typical to a maximum of ±4.5% including hysteresis at 25˚C (77˚F); below 20% RH and above 80% RH ±6% typical
Resolution	0.01%
Drift	<1% per year typical
Response Time
Temperature	7:30 minutes in air moving 1 m/s (2.2 mph)
RH	20 seconds to 90% in airflow of 1 m/s (2.2 mph)
Logger
Radio Power	1 mW (0 dBm)
Transmission Range	Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard	Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)
Logger Operating Range	-20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Logging Rate	1 second to 18 hours
Logging Modes	Fixed interval (normal, statistics) or burst
Memory Modes	Wrap when full or stop when full
Start Modes	Immediate, push button, date & time, or next interval
Stop Modes	When memory full, push button, date & time, or after a set logging period
Restart Mode	Push button
Time Accuracy	±1 minute per month at 25°C (77°F)
Battery Life	1 year, typical with logging interval of 1 minute. Faster logging and/or statistics sampling intervals, entering burst logging mode, and remaining connected with the app will impact battery life. Excessive readouts, audible alarms, and paging all impact battery life. Visual alarms and other events can have a marginal impact on battery life.
Battery Type	Two AAA 1.5 V alkaline batteries, user replaceable
Memory	128 KB (84,650 measurements, maximum)
Full Memory Download Time	Approximately 60 seconds; may take longer the further the device is from the logger
LCD	LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size	3.66 x 8.48 x 2.29 cm (1.44 x 3.34 x 0.9 in.)
Weight	56 g (1.98 oz)
Environmental Rating	IP50
	The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

*Per RH sensor manufacturer data sheet

The post HOBO Temperature/Relative Humidity Data Logger – MX1101 appeared first on LOGGERINDO Indonesia.

Tambahkan MX Gateway untuk akses jarak jauh ke data Anda di perangkat lunak HOBOlink berbasis cloud Onset.

Anda dapat mengunduh aplikasi HOBOconnect di sini:

Fitur:

• Mengatur data logger melalui aplikasi dan mengunduh data dengan koneksiBluetooth Low Energy (jangkauan 30 meter)
• Ambil data di lokasi yang sulit dijangkau menjadi lebih mudah
• Alarm visual real-time untuk peringatan kondisi di lapangan
• Rumah yang ringkas dan tahan cuaca dengan dudukan internal
• View data secara real time dengan aplikasi HOBOconnect gratis dari Onset
• Bagikan data yang diunduh dengan mudah dari perangkat seluler Anda
• Akurasi: +/- 0.2C ° dan +/- 2.5% RH

Spesifikasi:

Temperature Sensor
Range	MX2301A and MX2305 internal sensors: -40 to 70°C (-40 to 158°F) MX2302A external temperature sensor: -40 to 70°C (-40 to 158°F) MX2303 and MX2304 external sensors: -40 to 100°C (-40 to 212°F), with tip and cable immersion in fresh water up to 50°C (122°F) for one year
Accuracy	±0.25°C from -40 to 0°C (±0.45 from -40 to 32°F) ±0.2°C from 0 to 70°C (±0.36 from 32 to 158°F) ±0.25°C from 70 to 100°C (±0.45 from 158 to 212°F), MX2303 and MX2304 only
Resolution	MX2301A and MX2302A: 0.02°C (0.036°F) MX2303, MX2304, and MX2305: 0.04°C (0.072°F)
Drift	<0.01°C (0.018°F) per year
Relative Humidity Sensor* (MX2301A, MX2302A only)
Range	0 to 100% RH, -40° to 70°C (-40° to 158°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%
Accuracy	±2.5% from 10% to 90% (typical) to a maximum of ±3.5% including hysteresis at 25°C (77°F); below 10% RH and above 90% RH ±5% typical
Resolution	0.01%
Drift	<1% per year typical
Response Time (typical, to 90% of change)
Temperature	Without Solar Radiation Shield	With RS1/M-RSA Solar Radiation Shield	With RS3-B Solar Radiation Shield
MX2301A internal sensor	17 minutes in air moving 1 m/sec	24 minutes in air moving 1 m/sec	NA
MX2302A external sensor	3 minutes, 45 seconds in air moving 1 m/sec	7 minutes, 45 seconds in air moving 1 m/sec	6 minutes, 30 seconds in air moving 1 m/sec
MX2303/MX2304 external sensors	3 minutes in air moving 1 m/sec; 20 seconds in stirred water	7 minutes in air moving 1 m/sec	4 minutes in air moving 1 m/sec
MX2305 internal sensor	17 minutes in air moving 1 m/sec	24 minutes in air moving 1 m/sec	NA
RH	Without Solar Radiation Shield	With RS1/M-RSA Solar Radiation Shield	With RS3-B Solar Radiation Shield
MX2301A internal sensor	30 seconds in air moving 1 m/sec	40 seconds in air moving 1 m/sec	NA
MX2302A external sensor	15 seconds in air moving 1 m/sec	30 seconds in air moving 1 m/sec	30 seconds in air moving 1 m/sec
Logger
Operating Range	-40° to 70°C (-40° to 158°F)
Radio Power	1 mW (0 dBm)
Transmission Range	Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard	Bluetooth Low Energy (Bluetooth Smart)
Logging Rate	1 second to 18 hours
Logging Modes	Fixed interval (normal, statistics) or burst
Memory Modes	Wrap when full or stop when full
Start Modes	Immediate, push button, date & time, or next interval
Stop Modes	When memory full, push button, date & time, or after a set logging period
Time Accuracy	±1 minute per month 0° to 50°C (32° to 122°F)
Battery Type	2/3 AA 3.6 Volt lithium, user replaceable
Battery Life	2 years, typical with logging interval of 1 minute and Bluetooth Always On enabled; 5 years, typical with logging interval of 1 minute and Bluetooth Always On disabled. Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.
Memory	MX2301A and MX2302A: 128 KB (63,488 measurements, maximum) MX2303, MX2304, and MX2305: 128 KB (84,650 measurements, maximum)
Full Memory Download Time	Approximately 60 seconds; may take longer the further the device is from the logger
Dimensions	Logger housing: 10.8 x 5.08 x 2.24 cm (4.25 x 2.0 x 0.88 in.) External temperature sensor diameter: 0.53 cm (0.21 in.) External temperature/RH sensor diameter: 1.17 cm (0.46 in.) External sensor cable length: 2 m (6.56 ft) Solar radiation shield bracket: 10.8 x 8.3 cm (4.25 X 3.25 in.)
Weight	Logger: 75.5 g (2.66 oz) Solar radiation shield bracket: 20.4 g (0.72 oz)
Materials	Acetal, silicone gasket, stainless steel screws
Environmental Rating	NEMA 6 and IP67
	The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

*Per RH sensor manufacturer data sheet

The post HOBO External Temperature/RH Sensor Data Logger – MX2302A appeared first on LOGGERINDO Indonesia.

HOBO MX2301 adalah pencatat data tahan cuaca dengan sensor suhu dan kelembaban relatif bawaan. Memanfaatkan Bluetooth Hemat Energi, logger memungkinkan pengaturan yang mudah dan cepat dan unduhan data langsung dari perangkat seluler Anda dengan aplikasi HOBOconnect gratis dari Onset. MX2301 memberikan pengukuran akurasi tinggi di lingkungan luar ruangan yang keras.

Tambahkan MX Gateway untuk akses jarak jauh ke data Anda di perangkat lunak HOBOlink berbasis Onset cloud.

Fitur

• Pengaturan nirkabel yang nyaman dan mengunduh melalui Bluetooth Low Energy (jangkauan 100 kaki)
• Ambil data di lokasi yang sulit dijangkau
• Alarm visual memperingatkan Anda akan kondisi di luar jangkauan
• Rumah yang ringkas dan tahan cuaca dengan dudukan internal
• Lihat data saat ini secara real-time dengan aplikasi HOBOconnect gratis dari Onset
• Bagikan data yang diunduh dengan mudah dari perangkat seluler Anda
• Akurasi: +/- 0.2C ° dan +/- 2.5% RH

Spesifikasi

Temperature Sensor
Range	MX2301A and MX2305 internal sensors: -40 to 70°C (-40 to 158°F) MX2302A external temperature sensor: -40 to 70°C (-40 to 158°F) MX2303 and MX2304 external sensors: -40 to 100°C (-40 to 212°F), with tip and cable immersion in fresh water up to 50°C (122°F) for one year
Accuracy	±0.25°C from -40 to 0°C (±0.45 from -40 to 32°F) ±0.2°C from 0 to 70°C (±0.36 from 32 to 158°F) ±0.25°C from 70 to 100°C (±0.45 from 158 to 212°F), MX2303 and MX2304 only
Resolution	MX2301A and MX2302A: 0.02°C (0.036°F) MX2303, MX2304, and MX2305: 0.04°C (0.072°F)
Drift	<0.01°C (0.018°F) per year
Relative Humidity Sensor* (MX2301A, MX2302A only)
Range	0 to 100% RH, -40° to 70°C (-40° to 158°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%
Accuracy	±2.5% from 10% to 90% (typical) to a maximum of ±3.5% including hysteresis at 25°C (77°F); below 10% RH and above 90% RH ±5% typical
Resolution	0.01%
Drift	<1% per year typical
Response Time (typical, to 90% of change)
Temperature	Without Solar Radiation Shield	With RS1/M-RSA Solar Radiation Shield	With RS3-B Solar Radiation Shield
MX2301A internal sensor	17 minutes in air moving 1 m/sec	24 minutes in air moving 1 m/sec	NA
MX2302A external sensor	3 minutes, 45 seconds in air moving 1 m/sec	7 minutes, 45 seconds in air moving 1 m/sec	6 minutes, 30 seconds in air moving 1 m/sec
MX2303/MX2304 external sensors	3 minutes in air moving 1 m/sec; 20 seconds in stirred water	7 minutes in air moving 1 m/sec	4 minutes in air moving 1 m/sec
MX2305 internal sensor	17 minutes in air moving 1 m/sec	24 minutes in air moving 1 m/sec	NA
RH	Without Solar Radiation Shield	With RS1/M-RSA Solar Radiation Shield	With RS3-B Solar Radiation Shield
MX2301A internal sensor	30 seconds in air moving 1 m/sec	40 seconds in air moving 1 m/sec	NA
MX2302A external sensor	15 seconds in air moving 1 m/sec	30 seconds in air moving 1 m/sec	30 seconds in air moving 1 m/sec
Logger
Operating Range	-40° to 70°C (-40° to 158°F)
Radio Power	1 mW (0 dBm)
Transmission Range	Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard	Bluetooth Low Energy (Bluetooth Smart)
Logging Rate	1 second to 18 hours
Logging Modes	Fixed interval (normal, statistics) or burst
Memory Modes	Wrap when full or stop when full
Start Modes	Immediate, push button, date & time, or next interval
Stop Modes	When memory full, push button, date & time, or after a set logging period
Time Accuracy	±1 minute per month 0° to 50°C (32° to 122°F)
Battery Type	2/3 AA 3.6 Volt lithium, user replaceable
Battery Life	2 years, typical with logging interval of 1 minute and Bluetooth Always On enabled; 5 years, typical with logging interval of 1 minute and Bluetooth Always On disabled. Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.
Memory	MX2301A and MX2302A: 128 KB (63,488 measurements, maximum) MX2303, MX2304, and MX2305: 128 KB (84,650 measurements, maximum)
Full Memory Download Time	Approximately 60 seconds; may take longer the further the device is from the logger
Dimensions	Logger housing: 10.8 x 5.08 x 2.24 cm (4.25 x 2.0 x 0.88 in.) External temperature sensor diameter: 0.53 cm (0.21 in.) External temperature/RH sensor diameter: 1.17 cm (0.46 in.) External sensor cable length: 2 m (6.56 ft) Solar radiation shield bracket: 10.8 x 8.3 cm (4.25 X 3.25 in.)
Weight	Logger: 75.5 g (2.66 oz) Solar radiation shield bracket: 20.4 g (0.72 oz)
Materials	Acetal, silicone gasket, stainless steel screws
Environmental Rating	NEMA 6 and IP67
	The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

The post HOBO Temperature/RH Data Logger – MX2301A appeared first on LOGGERINDO Indonesia.