HOBO Carbon Dioxide – Temp – RH Data Logger – MX1102A

Description

HOBO Data Logger MX1102 CO2 dari Onset dapat digunakan untuk mengukur dan mencatat gas karbon dioksida atau CO2 di gedung dan lingkungan non-kondensasi lainnya. Data Logger ini dapat mengukur gas CO2 dari 0 – 5.000 bagian per juta (ppm) – dan dilengkapi dengan aplikasi HOBOconnect yang gratis sehingga dapat digunakan untuk mengakses data langsung dari ponsel atau tablet Anda dalam jarak 30 meter.

MX1102 juga dilengkapi dengan port USB sehingga dapat digunakan dengan komputer yang menjalankan perangkat lunak grafik & analisis HOBOware.

MX1102 memiliki dukungan MX Gateway untuk akses jarak jauh ke data Anda di perangkat lunak HOBOlink berbasis cloud Onset.

Fitur:

• Komunikasi tanpa kabel dengan Teknologi Bluetooth Low Energy (BLE)
• Masa pakai baterai enam bulan dengan laju logging CO2 5 menit
• Mudah digunakan dan dilepas menggunakan aplikasi HOBOconnect gratis
• Ambang batas alarm tinggi & rendah visual dan terdengar
• Teknologi sensor CO2 NDIR yang dapat mengkalibrasi sendiri memastikan akurasi yang optimal dan biaya perawatan yang lebih rendah
• Teknologi konektivitas yang dipatenkan

Spesifikasi:

Temperature Sensor
Range	0° to 50°C (32° to 122°F)
Accuracy	±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution	0.024°C at 25°C (0.04°F at 77°F)
Drift	<0.1°C (0.18°F) per year
RH Sensor
Range	1% to 90% RH (non-condensing)
Accuracy	±2% from 20% to 80% typical to a maximum of ±4.5% including hysteresis at 25°C (77°F); below 20% and above 80% ±6% typical
Resolution	0.01%
Drift	<1% per year typical
CO2 Sensor
Range	0 to 5,000 ppm
Accuracy	±50 ppm ±5% of reading at 25°C (77°F), less than 90% RH non-condensing and 1,013 mbar
Warm-up Time	15 seconds
Calibration	Auto or manual to 400 ppm
Non-linearity	<1% of FS
Pressure Dependence	0.13% of reading per mm Hg (corrected via user input for elevation/altitude)
Operating Pressure Range	950 to 1,050 mbar (use Altitude Compensation for outside of this range)
Compensated Pressure Range	-305 to 5,486 m (-1,000 to 18,000 ft)
Sensing Method	Non-dispersive infrared (NDIR) absorption
Response Time
Temperature	12 minutes to 90% in airflow of 1 m/s (2.2 mph)
RH	1 minute to 90% in airflow of 1 m/s (2.2 mph)
CO2	1 minute to 90% in airflow of 1 m/s (2.2 mph)
Logger
Radio Power	1 mW (0 dBm)
Transmission Range	Approximately 30.5 m (100 ft) line-of-sight
Wireless Data Standard	Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)
Logger Operating Range	0° to 50°C (32° to 122°F); 0 to 95% RH (non-condensing)
Logging Rate	1 second to 18 hours
Logging Modes	Fixed interval (normal, statistics) or burst
Memory Modes	Wrap when full or stop when full
Start Modes	Immediate, push button, date & time, or next interval
Stop Modes	When memory full, push button, date & time, or after a set logging period
Time Accuracy	± 1 minute per month at 25°C (77°F)
Power Source	4 AA 1.5 Volt batteries (user replaceable) or USB power source (5 V DC, 2 Watts)
Battery Life	6 months, typical with logging and sampling intervals of 5 minutes or slower; 6 months or less with logging and sampling intervals faster than 5 minutes while logging CO2. Entering burst logging mode will impact battery life. With app use, battery life can be reduced by remaining connected, excessive readouts, audible alarms, and paging. Visual/audible alarms and other events can have a marginal impact on battery life.
Memory	128 KB (84,650 measurements, maximum)
Download Type	USB 2.0 interface or via Bluetooth Smart
Full Memory Download Time	20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger
LCD	LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size	7.62 x 12.95 x 4.78 cm (3.0 x 5.1 x 1.88 inches)
Weight	267.4 g (9.43 oz)
Environmental Rating	IP50
	The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).