HOBO State Data Logger – UX90-001

Description

HOBO State/Pulse/Event/Runtime data logger mencatat perubahan status, pulsa elektronik, dan penutupan kontak mekanis atau listrik dari sensor eksternal. Data logger ini ideal untuk memantau konsumsi energi, pengoperasian peralatan mekanis, serta aliran air dan gas. HOBO UX90-001 State Data Logger tersedia dalam model memori standar 128 KB (UX90-001) yang mampu melakukan 84.650 pengukuran dan versi memori 512KB yang diperluas (UX90-001M) yang mampu melakukan lebih dari 346.795 pengukuran.

 

Fitur

• Satu logger dengan 4 mode perekaman
• Switch internal dapat digunakan untuk menentukan kapan pintu atau jendela terbuka atau tertutup
• Kompatibel dengan berbagai macam sensor eksternal
• Dipasangkan dengan kabel input 2,5 mm
• Kompatibel dengan perangkat lunak HOBOware dan HOBOware Pro untuk penyiapan, grafik, dan analisis logger

 

Spesifikasi

Internal Sensor

---

Maximum state, event, runtime frequency: 1 Hz
Preferred switch state: No magnet present (normally open)

 

External Input

---

External contact input: Electronic solid state switch closure or logic driven voltage output
Range: 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)
Maximum pulse frequency: 50 Hz
Maximum state, event, runtime frequency: 1 Hz
Pulse, event lockout time: 0 to 1 second in 100 ms steps
Solid state switch closure: Input Low: < 10 KΩ; Input High: > 500 KΩ
Internal weak pull-up: 100 KΩ
Input impedance: Solid state switch closure: 100 KΩ pull up

 

Logger

---

Resolution: Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Time accuracy: ±1 minute per month at 25°C (77°F) (see Plot A)
Battery life: 1 year, typical with logging intervals greater than 1 minute and normally open contacts

Memory
UX90-001: 128 KB (84,650 measurements, maximum)
UX90-001M: 512 KB (346,795 measurements, maximum)

Download type: USB 2.0 interface

Download time: 10 seconds for 128 KB; 30 seconds for 512 KB

Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)
Weight: 23 g (0.81 oz)
Environmental rating: IP50

 – The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)